Abstract
The modulation asymmetry of a multifunction integrated optic circuit (MIOC) indicates the difference in the phase response to modulation electric fields with the same magnitude but different directions, and is partly caused by the vertical component of the modulation signal. This introduces a nonlinear phase error that is difficult to compensate in fiber optic gyroscopes (FOGs), which needs to be suppressed. In this paper, a sinking-electrode MIOC design to suppress the modulation asymmetry is proposed and verified through numerical simulations. Optimal parameters of the gap, height, side-wall angle, and center position error of the sinking electrodes are obtained on the basis of the simulation results. With the proposed method, the modulation asymmetry of MIOC can be reduced from 5 × 10 -4 rad to 1 × 10 -6 rad, thus facilitating the development of high-performance FOGs. Furthermore, compared with the traditional electrode design, the sinking-electrode design can increase the tolerance for the manufacturing process, and the design configuration can be obtained through the general process method.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
