Modeling, Validation, and Analysis of a Concentrating Solar Collector Field Integrated with a District Heating Network

Abstract

In recent years, concentrating solar collectors have been integrated with several district heating systems with the aim of taking advantage of their low heat losses. The present study investigates the Brønderslev combined heat and power plant, which consists of a 16.6 MW parabolic trough collector field, two biomass boilers, and an organic Rankine cycle system. The study focuses on the solar collector field performance and integration with the district heating network. An in situ characterization of the parabolic solar collector field using the quasi-dynamic test method found that the field had a peak efficiency of 72.7%. Furthermore, a control strategy for supplying a constant outlet temperature to the district heating network was presented and implemented in a TRNSYS simulation model of the solar collector field. The developed simulation model was validated by comparison to measurement data. Subsequently, the simulation model was used to conduct a sensitivity analysis of the influence of the collector row spacing and tracking axis orientation. The results showed that the current suboptimal tracking axis rotation, made necessary by the geography of the location, only reduced the annual power output by 1% compared to the optimal configuration. Additionally, there were only minor improvements in the annual heat output when the row spacing was increased past 15 m (ground cover ratio of 0.38).