Modeling of separations by closed-loop steady-state recycling chromatography of a racemic pharmaceutical intermediate

Abstract

Closed-loop steady-state recycling (SSR) is a cyclic, one-column process that is similar to simulated moving bed (SMB) chromatography in several respects. Both processes are cyclic. In both SMB and SSR, fractions are collected from the leading and trailing portions of the circulating chromatographic profile, and fresh sample is injected into the interior of the profile. However, SMB is a continuous process whereas SSR is a discontinuous, repetitive process. This paper presents a model for the closed-loop SSR process and its experimental validation in a case of practical importance. For this last purpose, we used the closed-loop SSR separation of the enantiomers of a racemic pharmaceutical intermediate. The experimental determination of the competitive adsorption equilibria was performed by frontal analysis in a system composed of a chiral HPLC column as the stationary phase and pure acetonitrile as the mobile phase. All the adsorption data were well correlated by the Langmuir model. The Langmuir model was used to calculate overloaded band profiles corresponding to the separation of racemic mixtures at both analytical and preparative scales. Theoretical band profiles were calculated using the equilibrium–dispersive model. With proper corrections for the contributions of the sources of extra-column band broadening, the model properly predicts the experimental band profiles obtained in the closed-loop SSR setup and demonstrates that a cyclic steady-state develops after the completion of a finite number of cycles. The results also show that the extra-column effects must be accounted for in order to model the closed-loop SSR process accurately.