Abstract
This paper presents the modeling and simulation of photovoltaic (PV) modules using the MATLAB/SIMULINK environment. The main objective was to find the nonlinear current-versus-voltage (I–V) and power-versus-voltage (P–V) characteristics curves for solar PV modules Photonix 150W and Photonix 140W and to compare the results with the manufacturer’s data sheet. The Embedded MATLAB function finds the best output current and power with respect to voltage characteristics curves for various cell temperature and solar irradiation values for the solar PV model, which includes the effect of the series resistance. Thus, the parallel resistance, which is infinite, can be neglected for simplification. The modeling method and the proposed Embedded MATLAB function are helpful for power electronics designers, who need a trouble-free and user-friendly modeling method for the simulation of solar PV systems. The parameters that compose various PV models have been proposed by many authors. By changing the parameter values, the output current and power with respect to voltage characteristics curves are acquired, and simulation results match the manufacturer’s data.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.