Abstract
Mapping is one of the mobile robot's most basic applications. A mobile robot's sensors, such as a laser sensor, sonar, and camera, are used to create the map. Most mapping techniques use simultaneous localization and Mapping (SLAM). SLAM allows for creating a map and the localization of the robot's position on it. This research compares the trajectories of a mobile robot created by several ROS-based SLAM systems. And also, GMapping and Karto SLAM are two well-known SLAM algorithms employed. The mobile robot is equipped with 2D lidar and monocular camera. The mapping is done at two distinct locations, in labs of varying sizes with varying numbers of static and dynamic objects. Three test runs are conducted for GMapping to examine the effects of various variables on mapping quality, including particle filter, mapping delay, and robot speed. The results show a significant difference in operation completion time and mapping accuracy as a result of the parameter changing over the three test runs. Due to the improved accuracy of the parameter used in the second test run of GMapping and Karto SLAM, the accuracy of the maps is the basis for this improvement. On the other hand, the second test run with robot particle filter 30, mapping delay 1, and speed 0.13m/s is thought to be the best3\2 13Q/0.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.