Minimizing toxic chlorinated byproducts during electrochemical oxidation of Ni-EDTA: Importance of active chlorine-triggered Fe(II) transition to Fe(IV)

Abstract

The formation of chlorinated byproducts represents a significant threat to the quality of the effluent treated using electrochemical advanced oxidation processes (EAOPs), thus spurring investigation into alleviating their production. This study presents a new strategy to minimize the release of chlorinated intermediates during the electrochemical oxidation of Ni-EDTA by establishing a dual mixed metal oxide (MMO)/Fe anode system. The results indicate that the dual-anode system achieved a substantially higher rate (0.141 min−1) of Ni-EDTA destruction and accordingly allowed a more pronounced removal of aqueous Ni (from 39.85 to 0.63 mg L−1) after alkaline precipitation, compared with its single MMO anode (0.017 min−1 of Ni-EDTA removal, with 14.38 mg L−1 Ni remaining) and single Fe anode (insignificant Ni-EDTA removal, with 38.37 mg L−1 Ni remaining) counterparts. Compared to reactive chlorine species (RCS) produced from the single MMO anode system, Fe(IV) was in situ generated from the dual-anode system and was predominantly responsible for the attenuation of chlorinated byproducts and thus the decrease in the acute toxicity of the treated solution (evaluated using luminescent bacteria). The Fe(IV)-dominated dual-anode system also exhibited superior performance in removing multiple pollutants (including organic ligands, Ni, and phosphite) in the real electroless plating effluent. The findings suggest that the strategy for Fe(II) transition to Fe(IV) by active chlorine paves a new avenue for yielding less chlorinated products with lower toxicity when EAOPs are used to treat chloride-containing organic wastewater.