Abstract
Four composite coatings were fabricated by laser melting. Amorphous phase appeared in the Fe43.2Ni28.8B19.2Si4.8Nb4 and Fe43.2Co14.4Ni14.4B19.2Si4.8Nb4 coatings but not in the Fe30Co30Ni15B17Si8 and Fe39Ni36Mo2B18Si5 coatings. The growth of crystalline grain in the coatings was suppressed greatly due to the large cooling rates caused by fast laser scanning. But the crystallization in the coatings cannot be avoided completely and an amorphous and crystalline composite coating was formed in melted zone. Amorphous phase can increase the hardness of coatings greatly and the highest hardness is related to the amount of amorphous phase in the coatings. The amorphous and crystalline composite coatings exhibit excellent performance of abrasion.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
