Microstructure and superconducting current ofIn situ Nb3Sn superconducting wire

Abstract

The diffusion of elemental tin and the morphological change of niobium filaments inin situ Nb3Sn superconducting composite wires and their influences on critical current were studied. When the amount of tin plated on the samples was high, the diffusion of elemental tin was enhanced. The critical current increased with increasing tin concentration but the increase became sluggish at high tin contents. The niobium filaments were initially ribbon-like but they became rod-like and then sausage-like after annealing treatment. Such a morphological change acted to reduce superconducting current capacity. When the amount of niobium was low, the filaments spheroidized by high-temperature and long-term annealing, resulting in serious reduction in critical current and upper critical magnetic field. High niobium contents led to high critical current and high upper critical magnetic field due to retainment of continuity of the filaments after annealing, effective proximity effect and a high amount of Nb3Sn formed in comparison with low niobium content amount. The titanium addition raised the upper critical magnetic field, resulting in improvement in critical current at high magnetic fields.