Abstract
SiCP/Cu composite was prepared by metal injection molding process. Microstructure, mechanical properties, fracture surface, and wear resistance of SiCP/Cu composite were investigated in this study. The research results show that SiCP/Cu were sintered sucessfully by the sintering process with hydrogen protection and high temperature of 1050°C. The tensile strength of the composites depends on the fraction and distribution of SiC particles which is resulted from microcracks nucleate in the matrix between SiC particles because of SiC particle aggregation. The tensile strengths of 5vol.%, 10vol.%, and15vol.%SiCP/Cu are 254MPa, 291MPa and 278MPa separately. SiC particles are contribute to enhance the abrasive resitance of the composite when particle volume fraction increase from 10% to 15%.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
