Abstract
To meet the demand for the new generation of neutron absorber materials (NAMs) for the dry storage of the spent nuclear fuels, (B4C + Al2O3)/Al composites were fabricated by powder metallurgy technique using ultrafine Al powders. The composites designed with various fabricating parameters and fabricated at various sintering temperatures were characterized by electron microscopy and mechanically tested. The sample sintered at 450 °C shows the best strength-ductility balance at 350 °C (106.2 MPa in ultimate tensile strength and 9.6% in elongation). Addition of B4C particles and increase of the Al2O3 film thickness could enhance the strength of the composites at room temperature but showed no obvious effect on the strength at 350 °C. When sintering temperature of the composites increased from 450 °C to 550 °C, the transformation of amorphous Al2O3 lamellae to γ-Al2O3 particles led to deterioration of the strength of the composites. Based on the analyses of both high-temperature deformation mechanism and strengthening mechanism, it was considered that the amorphous Al2O3 could pin the grain boundaries and prevent them from gliding, which was the main factor to significantly increase the high-temperature strength. Based on the results, a strategy to design the aluminium matrix NAMs with excellent high-temperature strength was proposed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
