Abstract
We present a novel measurement method for the characterization of thermal diodes in a saturated steam atmosphere. A measuring setup has been developed in which two pressure sensors are integrated. Using a developed analytical model, the heat flow, the volume flow, and the cracking pressure are determined from the measured absolute pressures and the pressure difference. The analytical model was verified using a flow through an orifice. We first calculated the volume flow through the orifice, with a diameter of 3 mm, using the Reader-Harris equation and then compared it to experimentally determined values. The experimentally determined values showed a discrepancy of 9%. With the measurement setup, we have characterized a check valve developed for magnetocaloric heat pumps, which has a thermally rectifying behavior. The developed check valve consists of three spring arms, which are radially attached to a valve disk. The heat flow through the check valve in the forward direction is 166 W for water, 239 W for ethanol, and 547 W for methanol at a temperature difference of 1 K. In the reverse direction, the heat flow is -0.03 W at a temperature difference of -1 K. For methanol, this corresponds to a rectification coefficient of more than 18 000.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
