Abstract
As a classic Earth magnetic field sensor, fluxgate magnetic sensors have great potential applications in many fields. This paper presents a new 3D micro-solenoid fluxgate magnetic sensor based on the MEMS technique. The excitation coils were placed vertically to the detection coils on the chip plane, around a rectangular shaped magnetic core. Polyimide was used to insulate coils and magnetic core. Width of copper conductor lines is 50 μm, and line space is 50 μm. The design of such fluxgate magnetic sensor followed second harmonic signal selecting method. Phase-lock amplifier was used to get second harmonic signal output by detection coils. The linear range of 0–80 μT with sensitivity of 6.7 V/T was achieved from the fabricated sensor with excitation current of 430 mA and the operational frequency of 40 KHz. As the excitation current was 470 mA, linear range of 0–50 μT with sensitivity of 21.7 V/T was achieved.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
