Abstract
Mechanochemical sulfidization of a mixed sulfide/oxide copper ore by co-grinding with sulfur and additives including Mg(NO3)2 and Fe(NO3)3 salts and iron, aluminum and magnesium powders was investigated for the first time. Also, the influence of sulfidization during the wet-milling process was examined on the separation efficiency and recovery of copper in detail. The results demonstrated that co-grinding with sulfur solely had the best flotation performance at the value of 0.5 wt.% and it was attributed to the possible existence of SO bonding on copper oxides surfaces. In addition, adding magnesium nitrate salt, magnesium powder, iron nitrate salt and aluminum powder as additive associated with 0.5 wt% sulfur into ball milling caused the flotation improvement at the amounts of 0.2 wt%, 0.2 wt%, 0.5 wt% and 0.5 wt%, respectively. Also, the effect of grinding time and sulfidization pH with 0.5 wt% sulfur solely was determined and pHs of 7.5 to 8.5 gave the best results. The highest recovery (75.76%) and separation efficiency (63.44%) were achieved at pH of 7.5 and 8.5, respectively.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
