Abstract
Instrumented indentation tests have been conducted on the surface and cross-section of the two WC based coatings obtained by means of high velocity oxygen fuel thermal spray techniques in order to investigate their mechanical properties. The yield strength of the coatings has been determined by means of the Zeng and Chiu model. In addition, the absolute hardness of the coatings has been determined by means of the modified proportional specimen resistance model. Additionally, conventional spherical indentation tests were carried out on the surface of the coatings, aimed at determining the yield strength by means of the equations employed in classical elastic contact mechanics. The analysis indicates that the yield strength determined from the Zeng and Chiu model is of 3·5 and 3·1 GPa for the WC–10Co–4Cr and WC–12Co coatings respectively. The absolute hardness of the WC–10Co–4Cr coating was found to be of 11·1 GPa, whereas that of the WC–12Co was of 9·3 GPa.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
