Abstract
The objective of this study was to investigate the effects of rice husk and acrylic impact modifiers on the mechanical properties of unplasticised poly(vinyl chloride) (PVC-U) composites. The composites were prepared using a two-roll mill at temperature 165 °C before being hot pressed at 185 °C. The incorporation of rice husk (RH) fillers from 10 to 40 per hundred resin (phr) has increased the flexural and tensile modulus of the unmodified and modified (8 phr impact modifier) PVC-U composite. The flexural strength for both unmodified and modified PVC-U composite was observed to increase until RH loading of 20 phr. However, the tensile and impact strength of PVC-U composite decreased with RH loading. The scanning electron microscopy (SEM) showed that the rice husk fillers agglomerated and unevenly distributed throughout the matrix. The result showed that the impact strength of the filled PVC-U composites (20 phr filler) increased but the tensile and flexural properties decreased with increasing impact modifier content. The formulation containing 8 phr of acrylic impact modifier and 20 phr of RH loading showed the best balance of stiffness and toughness properties.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
