Abstract

A grain boundary engineered copper sample previously characterized by Electron Backscatter Diffraction (EBSD) has been selected for nanoindentation tests. Given the fact that grain boundaries have thicknesses in the order of 1 micron or less, it is essential to use nanomechanics to test the properties of individual grain boundaries. The Hysitron nanoindenter was selected over the MTS nanoindenter due to its superior optical capabilities that aid the selection and identification of the areas to be tested. An area of 2mm by 2mm with an average grain size of 50 microns has been selected for the study. Given the EBSD mapping, grains and grain boundaries with similar orientations are tested and the hardness and modulus are compared. These results will give a relationship between the mechanical properties and the engineered grain boundaries. This will provide for the first time a correlation between grain boundary orientation and the mechanical behavior of the sample at the nanoscale.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.