Abstract
Hybrid composites have proven endless benefits to the research communities in terms of environmental friendliness, mechanical properties, and development of new material. The present work explores the tensile, flexural, impact strengths, and water absorption properties of jute and palm leaf fiber-reinforced hybrid composites. Five types of hybrid composites were fabricated by varying jute and palm leaf fiber percentage of J100:P0, J25:P75, J50:P50, J25:P75, and J0:P100% with a constant weight ratio of polypropylene matrix. The findings showed that jute-palm leaf fiber-reinforced composite had positive effect on tensile, flexural, and impact strength. Experimental results showed that the J25:P75% (jute and palm leaf fiber) exhibited the highest tensile strength of 62.2 MPa and flexural strength of 82.26 MPa due to the optimal interfacial properties between the fibers and matrix. The impact strength of composites increased as the proportion of palm leaf fiber increased. Water absorption increased with jute fiber content, reaching a maximum of 1.26% at composite J100:P0, with lower water absorption at J0:P100% composite due to the higher moisture content of jute fiber.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
