Abstract

This paper proposes a comprehensive series of protocols that can make quantitative measurements on both breakdown and buildup aspects of thixotropic behaviors of cement pastes. While measuring breakdown and buildup separately, the correlations between these two aspects have also been investigated. Cement pastes with different water-to-binder ratios (w/b=0.4, 0.5 and 0.6) and different replacement levels of Diatomaceous Earth (DE) (0%, 2%, 6% and 10% by weight of cement) were studied. To simulate the real on-site conditions, parameters such as pressure and temperature were also considered during the measurement. The research found that increase in DE replacement dosage can reduce the energy required to breakdown thixotropic structure of cement pastes while no specific trend on buildup aspect was observed. Among the three used w/b ratios, the 0.5 w/b ratio has the most reduction effect in breakdown energy, where using 10% DE can lead to 65% of energy reduction in breakdown compared to the control sample. However, the measured yield stress for these specimens were very similar to each other. In addition, increase in temperature significantly increases the buildup ratio of cement pastes while increase in pressure as high as 20 MPa has a minimal impact on thixotropic properties of cement pastes.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.