Abstract
AbstractThe optical and electrical performances of varied configurations of visually attractive mosaic cubical luminescent solar concentrator photovoltaic (LSC PV) devices have been measured. These new designs of LSC PV devices consist of four cubical lightguides containing commercially available fluorophores with edge‐ and bottom‐mounted silicon solar cells. The 1 cm3 cubical component LSC PVs are made of poly (methyl methacrylate) (PMMA) doped by dyes from 10 to 150 ppm. The lightguides are covered with bifacial silicon solar cells at their edges and/or bottom and connected in series or parallel, depending on the device configuration. In total, 19 different configurations of mosaic LSC PV devices have been experimentally evaluated in this study.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Progress in Photovoltaics: Research and Applications
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.