Abstract
The thermal effects of fibre laser surface treatment on a ZrO2 engineering ceramic were studied using a computational finite-element model (FEM). Temperature increases on the surface and the bulk of the ZrO2 during the fibre laser processing were measured using an infra-red thermometer and specifically located thermocouples. The results showed an error of 5 per cent with the surface and 18 per cent within the bulk of the ZrO2 when comparing the experimental readings with those of the FEM. The FEM revealed a relationship between the traverse speed, power density, time, depth, and the temperature during various stages of the fibre laser surface treatment of the ZrO2. By utilizing data obtained from a thermogravimetry-differential scanning calorimetry (TG-DSC), the FEM predictions of the temperature distribution were used to map phase transformations and significant events occurring during the fibre laser surface treatment of the ZrO2. The mapping revealed that the fibre laser surface treatment generally resulted in a phase transformation of the ZrO2 at various temperatures changes as further shown in the article.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
