Abstract
Optical grade Dy2O3 ceramics was successfully produced by adding a small amount of ZrO2 as a sintering aid and hot isostatic pressing treatment at 1500∘C after pre-sintering at 1550∘C. No residual pores, grain boundary phases, or second phases were detected inside the transparent ceramics. Since birefringence was not observed under the polarizer, the produced Dy2O3 ceramics is an optically isotropic body. There was almost no beam distortion during the laser irradiation test, and the optical loss was extremely small (<0.1%/cm). The Verdet constant was 422radT-1m-1 at a wavelength of 633 nm, and the extinction ratio was 34 dB.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.