Magnetic Liquid Metal Marble: Characterization of Lyophobicity and Magnetic Manipulation for Switching Applications

Abstract

We report a “magnetic liquid metal marble” (MLMM) obtained by coating a liquid metal’s surface with micro/nano-sized ferromagnetic iron (Fe) particles, which enables on-demand, magnetic manipulation of a liquid metal droplet for switching applications. Among liquid metals, gallium-based liquid metal alloys have been developed for a variety of applications. However, most developed applications using the gallium-based liquid metal alloy only work on deformability because of its easy-wetting property stemming from surface oxidation. By coating the oxidized surface with the 45 $\mu \text{m}$ or 45 nm diameter Fe particles, the MLMM exhibits non-wetting property investigated by evaluating apparent contact angles and sliding angles against various surfaces. On the Teflon-coated glass, the largest contact angle was measured to be ~169.0°, and the lowest sliding angle was obtained to be 17.2°, respectively. In order to move the 45- $\mu \text{m}$ diameter Fe particles-coated MLMM, we measured the minimum required magnetic flux density of 150 gauss and demonstrated the magnetic control of the liquid metal marble to turn ON light emitting diodes. In addition, we investigated that hydrochloric acid-vapor treatment on the MLMM enhanced the lyophobicity (sliding angle of 9.4°), reduced the minimum magnetic flux density (150 to 107 gauss) to actuate it, and enabled electrical switching applicability even in silicon oil with shorter delay time and high mobility of the MLMM under the applied magnetic field. [2015-0329]