Abstract
This study aims to evaluate and compare the film thickness obtained with a resin cement and two composite resins, preheated and/or ultrasonically vibrated, as luting agents. One hundred and twenty-six (126) pairs of resin discs were randomly assigned to six experimental groups (n= 21) according to luting agent (Variolink Esthetic LC, IPS Empress Direct or Estelite Omega) and cementation technique (preheating at 68°C and/or ultrasonic vibration). Specimens were luted by applying a controlled force. Following sectioning and film thickness measurement through field emission gun scanning electron microscopy, statistical analysis was carried out considering a 5% significance level. Statistically significant lower film thickness was observed in Variolink Esthetic LC group when compared to all composite resin groups (p< 0.001), except IPS Empress Direct preheated and ultrasonically vibrated group (p = 0.073). IPS Empress Direct with ultrasonic vibration yielded statistically lower film thickness values than Estelite Omega groups, regardless of luting technique (p< 0.05). Ultrasonically vibrated Estelite Omega groups showed statistically lower film thickness values than solely preheated groups (p< 0.05). Both Variolink Esthetic LC and IPS Empress Direct preheated and ultrasonically vibrated provided the lowest film thickness. The addition of ultrasonic vibration during cementation proved to be effective in reducing film thickness of both tested composite resins. The cementation technique will have variable results depending on the luting material. Adhesive cementation protocols with composite resins should mainly consider ultrasonic vibration, but also preheating, as strategies for reducing film thickness. The tested resin cement, alongside with IPS Empress Direct composite resin preheated and ultrasonically vibrated, provided the lowest film thickness among the tested materials and techniques.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
