Abstract
β-Sialon powder was synthesized by in-situ carbothermal reduction-nitridation process, with fly ash and carbon black as raw materials. The influence of raw materials composition on synthesis process was investigated, and the phase composition and microstructure of the synthesized products were characterized by X-ray diffraction and scanning electronic microscope. The carbothermal reduction-nitridation reaction process was also discussed. It was found that increasing carbon content in a sample could promote the decomposition of mullite in fly ash and the formation of β-Sialon. The β-Sialon could be synthesized at 1550°C for 6h by heating the sample with the mass ratio of fly ash to carbon black of 100:56. The β-Sialon as-received in this study existed as granular with an average particle size of about 2μm. The carbothermal reduction-nitridation reaction process consisted of the nitridation processes of mullite, SiO2 and Al2O3 in fly ash as well as the conversion process of X-Sialon to β-Sialon.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.