Abstract
Surface polishing of hard diamond coatings is a key technique for applying such coatings in industry. In this study, we demonstrated surface modification of polycrystalline diamond films with minimal volume loss of the films by vertical irradiation of KrF excimer laser beams. Optimized laser scanning selectively removed surface asperities and reduced the surface roughness from ∼0.1 to ∼0.05 μm. Raman spectroscopic measurements revealed that laser polishing involves the phase transformation of diamond to amorphous carbon phases and thermal oxidation or evaporation of the amorphous phases. The residual amorphous carbon was almost completely removed by subsequent laser irradiation at appropriate fluences. We consider that the surface texture inherent to polycrystalline diamond films plays an important role in the concentration of laser beams on the nearby film surface. From reciprocating slide-type friction tests, we found that laser polishing decreased the initial friction coefficient from 0.5 to 0.1–0.3 against alumina balls and reduced the abrasion of the mating materials.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
