Low-cycle fatigue behavior of coated and uncoated single crystal Ni-based superalloy at various temperatures

Abstract

Within this work, the effect of different oxidation-resistant coatings on the low-cycle fatigue (LCF) behavior and damage mechanisms of third-generation single crystal (SC) Ni-based superalloy was investigated. Stress-controlled LCF tests of bare alloy, MCrAlY-coated and PtAl-coated thin-walled specimens were carried out at 760 °C, 850 °C and 980 °C. A unique clamping system was meticulously designed to overcome the clamping challenge in high-temperature furnaces. The cracking behaviors and failure modes were determined by advanced microstructure characterization. The results show that the coatings are detrimental to the LCF lifetime of thin-walled specimens, especially at low-medium temperatures of 760 °C and 850 °C. For bare alloy, the tip cracks nucleate from the surface oxide layer, whereas cracks in the coating-substrate system nucleate prematurely from the coating surface and propagate to the substrate. The oxygen diffusion and the frontward propagation of cracks are synergistically enhanced in the SC substrate, resulting in oxidation-assisted crack propagation and ultimate failure. Finally, A fatigue life prediction model is proposed by introducing coating-induced crack initiation and oxidation effects, where the predictive results fit well with experimental results. This study provides a comprehensive insight into the damage mechanisms and coating-induced LCF life degradation of the coating-substrate system.