Abstract

The article presents a new design of an AlGaAs/GaAs low-voltage thyristor for efficient high-current pulse generation at high repetition rates. It is demonstrated that optimizing the low-voltage thyristor p-base doping profile by using a thin highly doped layer allows for a significant increase in the operating frequencies. This applies to both a thyristor working without an external load and a vertical stack of a thyristor with a laser diode mini bar (LDMB). It is shown that the use of a 0.1- μm-thick highly doped layer, formed at the side of the p-base close to the n-emitter, leads to a significant increase of the holding current, which in our case exceeds 70 mA. At the same time, we were still able to obtain a low residual voltage of 1.5 V and a high blocking voltage of 32 V. The developed low-voltage thyristors have demonstrated the possibility of generating current pulses of 30-ns duration at a repetition rate of 10/70 kHz with an amplitude of 125/110 A, as well as the efficient pumping of LDMBs and laser pulses with a peak power of 68/57.5 W, respectively.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.