Abstract

In many applications there is a need to mix the signals of different frequencies or signals of different types, which emphasises the use of mixers or multipliers for different RF applications. In this paper, CMOS analog multiplier, with less number of transistors which can operate at high frequencies with low power and high is proposed. The proposed multiplier works on the basis of parallel connected MOS operation circuit. The power consumption is about 40uW. The circuit will work properly from 0.5V-1.8V supply voltage and the results for input of 1volt are presented here. The cut off frequency is about 4THz, and the simulations results presented here are up to 10GHz. The THD value for different voltage and frequency settings is in the range of 0.085%-2%. In the proposed architecture the linearity error is very less. The circuit is implemented using 180nm-TSMC MOSIS Level-49 model and simulated in HSPICE simulator and layout is designed using Tanner EDA L-Edit.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.