Abstract
Purpose Surfactants have been reported to have high inhibition efficiencies for corrosion of steel. This paper aims to study the performance of a low toxic copolymer of polydimethylsiloxane and polyoxyalkylene (POA) surfactant named as POPS, as a corrosion inhibitor for mild steel (ASTM 1005) in hydrochloric acid (HCl) solution at 25°C. Design/methodology/approach To evaluate POPS efficiency as a corrosion inhibitor, the following techniques were used: surface tension measurements, weight loss measurements, open circuit potential monitoring, potentiodynamic polarization curves, electrochemical impedance spectroscopy (EIS), scanning electron microscopy and contact angle measurements. Findings Results indicated that POPS acted as a mixed corrosion inhibitor and led to a hydrophobic protector film on the metal surface. The adsorption process obeyed the Langmuir adsorption isotherm by chemisorption. The maximum efficiency of the surfactant studied was achieved in a concentration around the critical micelle concentration. Originality/value Surfactant (POPS) of low level of toxicity acts as a mixed corrosion inhibitor in HCl medium. Inhibitor film formation was characterized by EIS results. A mechanism for corrosion inhibition is proposed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.