Low-Power Retentive True Single-Phase-Clocked Flip-Flop With Redundant-Precharge-Free Operation

Abstract

As basic components, optimizing power consumption of flip-flops (FFs) can significantly reduce the power of digital systems. In this article, an energy-efficient retentive true-single-phase-clocked (TSPC) FF is proposed. With the employment of input-aware precharge scheme, the proposed TSPC FF precharges only when necessary. In addition, floating node analysis and transistor level optimization are employed to further ensure the high energy efficiency of the FF without significantly increasing the area. Postlayout simulations based on SMIC 55-nm CMOS technology show that at a supply voltage of 1.2 V, the power consumption of the proposed FF is 84.37% lower than that of conventional transmission-gate flip-flop (TGFF) at 10% data activity. The reduction rate is increased to 98.53% as the data activity goes down to 0%. When the supply voltage decreases to 0.6 V, the proposed FF consumes only 0.411 fJ/cycle at 10% data activity, which is 84.23% lower than TGFF. Measurement results of ten test chips demonstrate the great energy efficiency of the proposed FF. Furthermore, the CK-to-Q delay of the proposed FF is 26.18% lower than that of TGFF at a supply voltage of 1.2 V.