LLC Converter in Capacitive Operation Utilizing ZCS for IGBTs – Theory, Concept and Verification of a 2 kW DC-DC Converter for EVs

Abstract

LLC resonant converters typically employ power MOSFETs in their inverter stage. The generally weak reverse recovery behaviour of the intrinsic body diodes of those MOSFETs causes significant turn-on losses when being forced to hard commutations. Continuous operation in this way will lead to self-destruction of the transistors. Consequently, zero-voltage switching (ZVS) is essential in a MOSFET-based inverter stage. To ensure ZVS, the LLC converter is operated in the inductive region. On the contrary, IGBTs show dominant turn-off losses and are therefore conventionally not applied in LLC converters typically requiring high switching frequencies to achieve low output voltages. However, if the LLC converter is intentionally designed for capacitive operation, zero-current switching (ZCS) is enabled and thus robust and cost-efficient IGBTs can be applied in the inverter stage. The aim of this work is to investigate the use IGBTs in the inverter of an LLC converter. The theory behind the capacitive operated LLC is derived using a switched simulation model and compared with the fundamental harmonic approximation (FHA). The results prove FHA to be useless for practical converter design. Instead, a stress value analysis based on switched model simulations is proposed to the design a capacitive operated LLC utilizing ZCS. A 2 kW prototype for on-board EV applications was built to verify the theory and design approach. The prototype confirms the derived theory and thus the deployment of IGBTs in the inverter stage of LLC resonant converters. Synchronous rectification turns out to require a specific control solution, but if given the resulting efficiency in the most critical operation point exceeds the value of a MOSFET-based (inductive operated) LLC-design of an identical application. Therefore, this concept should be further developed.