Live-fire validation of command-detonation residues testing using a 60 mm IMX-104 munition

Abstract

Command detonation (i.e., static firing) provides a method of testing munitions for their postdetonation residues early in the acquisition process. However, necessary modifications to the firing train and cartridge orientation raise uncertainty whether command detonation accurately represents residue deposition as it occurs during live-fire training. This study col-ected postdetonation residues from live-fired 60 mm IMX-104 mortar cartridges and then compared estimated energetic-compound deposition rates between live fire and prior command detonations of the same munition. Average live-fire deposition rates of IMX-104 compounds determined from 11 detonations were 3800 mg NTO (3-nitro-1,2,4-triazol-5-one), 34 mg DNAN (2,4-dinitroanisole), 12 mg RDX (1,3,5-Trinitroperhydro-1,3,5-Triazine), and 1.9 mg HMX (1,3,5,7-Tetranitro-1,3,5,7-Tetrazocane) per cartridge. Total live-fire residue deposition (mean ± standard deviation: 3800 ± 900 mg/cartridge) was not significantly different from command detonation using a representative fuze simulator (3800 ± 900 mg/cartridge, n = 7, p = 0.76) but was significantly different from command detonation using a simplified fuze simulator (2200 ± 500 mg/cartridge, n = 7, p < 0.01). While the dominant residue compound NTO was broadly similar between live fire and command detonation, the minor residue compounds RDX and DNAN were underestimated during command detonation by a factor of approximately three to seven.