Abstract
This research was focused on studying the performance of the Pd1Ag3/Al2O3 single-atom alloy (SAA) in the liquid-phase hydrogenation of di-substituted alkyne (1-phenyl-1-propyne), and development of a kinetic model adequately describing the reaction kinetic being also consistent with the reaction mechanism suggested for alkyne hydrogenation on SAA catalysts. Formation of the SAA structure on the surface of PdAg3 nanoparticles was confirmed by DRIFTS-CO, revealing the presence of single-atom Pd1 sites surrounded by Ag atoms (characteristic symmetrical band at 2046 cm−1) and almost complete absence of multiatomic Pdn surface sites (<0.2%). The catalyst demonstrated excellent selectivity in alkyne formation (95–97%), which is essentially independent of P(H2) and alkyne concentration. It is remarkable that selectivity remains almost constant upon variation of 1-phenyl-1-propyne (1-Ph-1-Pr) conversion from 5 to 95–98%, which indicates that a direct alkyne to alkane hydrogenation is negligible over Pd1Ag3 catalyst. The kinetics of 1-phenyl-1-propyne hydrogenation on Pd1Ag3/Al2O3 was adequately described by the Langmuir-Hinshelwood type of model developed on the basis of the reaction mechanism, which suggests competitive H2 and alkyne/alkene adsorption on single atom Pd1 centers surrounded by inactive Ag atoms. The model is capable to describe kinetic characteristics of 1-phenyl-1-propyne hydrogenation on SAA Pd1Ag3/Al2O3 catalyst with the excellent explanation degree (98.9%).
Highlights
Selective hydrogenation of alkynes to corresponding alkenes is of immense importance being widely used in the production of monomers, fine chemicals, and pharmaceuticals [1,2].Hydrogenation of acetylenic compounds is widely applied in the purification of ethylene produced by steam cracking of naphtha, because the presence of the traces of acetylene in ethylene leads to irreversible poisoning of metallocene polymerization catalysts due to its strong adsorption on the catalyst active sites
Selectivity decline in alkyne hydrogenation over Pd catalysts is frequently attributed to over-hydrogenation by hydrogen from palladium hydride phases [59]
In alkyne hydrogenation the high selectivity of bimetallic catalysts is frequently associated with suppression of overhydrogenation, which is provoked by hydrogen from PdHx [60,61]
Summary
Selective hydrogenation of alkynes to corresponding alkenes is of immense importance being widely used in the production of monomers, fine chemicals, and pharmaceuticals [1,2]. For selective butadiene hydrogenation on Pt-Cu SAA it was suggested that isolated Pt atoms are the active sites for hydrogen adsorption and dissociation, while hydrocarbon molecules adsorb on Cu surface. Pt exists as individual isolated atoms alloyed into the Cu surface These single Pt1 sites activate dissociation of dihydrogen and spillover of H to Cu. Spillover of H species reacting with butadiene adsorbed on Cu surface eventually lead to butene formation followed by its desorption. Investigation of the surface structure and H2 dissociation on PdAg single-atom alloy demonstrated that for successful partial hydrogenation of acetylene it is necessary that isolated Pd sites, on which the adsorption of hydrogen and alkyne molecules takes place, should be close enough to each other [35]. Our research was aimed at developing a kinetic model of the process based on the reaction mechanism proposed in the literature and capable of adequately describing the experimental data for the PdAg SAA catalyst
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
