Abstract
One of the major contributors to head positioning errors is carriage vibration in low frequency due to an air flow caused by disk rotation. It is necessary to suppress the disturbance for Hard Disk Drives (HDDs) to have more capacity. We experimentally studied a reduction in the flow-induced carriage vibration using linear protrusion structures by putting wires on carriage arms. This study was carried out using 2.5 inch HDD which has high rotational speed of 10,000 rpm. We measured position error signals (PES) and compared with a conventional carriage. From the experimental results, we found that the linear protrusion structure was effective to reduce the carriage vibration. Leading edge wire configuration and 2 linear protrusion configuration improved average non-repeatable position errors (NRPE) by 6.9% and 6.4%, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
