Abstract
AbstractThe development of linear muscle‐like actuators remains a key objective in the field of electroactive polymers (EAPs). While ionic EAPs are promising technologies to develop biomimetic artificial muscles, their reliance on liquid electrolytes for operation typically restricts them to use in bending devices. Seldom have ionic linear actuators been demonstrated in air, and never in vacuum. Here both are demonstrated. A rational approach supported by a theoretical model is described to identify the general conditions allowing the design of ionic actuators with intrinsically linear deformations. The model highlights that linear deformation can occur by combining two electroactive electrodes with different mechanical and/or electromechanical properties. Where previous work on laminated actuators resulted in bending only, here it is shown that by combining one soft and one stiff electrode, or one highly expanding electrode, and the other minimally deforming electrode, 0.55% linear strain is achieved when activated with 2 V. Best combination of electrodes is selected based on electromechanical model predictions. Single actuator fibers are fabricated for experimental validation. Graded force up to 0.18 N has been achieved by bundling together five linear actuators. The resulting artificial muscles operate in open‐air, and also under high vacuum conditions, opening possibilities for space applications.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
