Abstract

The fast luminescence component of barium fluoride (BaF_2) crystals with a subnanosecond decay time can find wide application in particle physics and nuclear physics. However, the slow luminescence component with the 630 ns decay time could cause pile-up signals at a high rate environment. Doping of BaF2 crystals with rare earth elements suppresses the slow emission component, but at the same time the radiation hardness of the crystals deteriorates. This work presents the results of studying crystal samples, both pure BaF2 and those doped with yttrium in a proportion of 1 at.%Y, 3 at.%Y and 5 at.%Y, irradiated with a fast neutron fluence of about 2.3×1014 n/cm2. Their light output and decay kinetics were measured before and after irradiation. It is found that the light output loss of a pure BaF2 crystal after irradiation is about 7%, and the light output loss of yttrium doped samples after irradiation is about two times higher. The measurement results demonstrate that after irradiation the fast component of each sample has a relative light output loss 2–3% larger than the slow one.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.