Lateral straining of turbulent boundary layers. Part 2. Streamline convergence

Abstract

Experimental measurements are presented showing the effects of streamline convergence on developing turbulent boundary layers. The longitudinal pressure-gradient in these experiments is nominally zero so the only extra rate-of-strain is the lateral convergence. Measurements have been made of mean flow and turbulence quantities at two different Reynolds numbers. The results show that convergence leads to a significant reduction in the skin-friction and an increase in the boundary layer thickness. There are also large changes in the Reynolds stresses with reductions occurring in the inner region and some increase in the outer flow. This is in contrast to the results of Saddoughi & Joubert (1991) for a diverging flow of the same included angle and zero pressure-gradient which show much smaller changes in the stresses and an approach to equilibrium. A new non-dimensional parameter, βD, is proposed to characterize the local effect of the convergence and it is shown how this parameter is related to Clauser's pressure-gradient parameter, βx. It is suggested that this is an equilibrium parameter for turbulent boundary layers with lateral straining. In the present flow case βD increases rapidly with streamwise distance leading to a significant departure from equilibrium. Measurement of terms in the transport equations suggest that streamline convergence leads to a reduction in production and generation and large increases in mean advection. The recovery of the flow after the removal of convergence has been shown to be characterized by a significant increase in the turbulent transport of shear-stress and turbulent kinetic energy from the very near-wall region to the flow further out where the stresses have been depleted by convergence.