Abstract
A new laser galvanometric scanning optical system incorporating a dynamic-tilt focusing lens is proposed to improve the laser spot performance in adaptive manufacturing applications. The simulations focus specifically on the laser spot size, the spot profile, the spot position, the spot energy distribution, and the size of the scanning working field. It is shown that for a designed spot size of 50 μm, the proposed system achieves an average spot size of 50.5 μm. Moreover, the maximum position deviation of the laser beam is reduced from (x=-3.02%, y=1.30%) in a traditional scanning system to (x=-0.055%, y=0.162%) in the proposed system. Finally, the maximum working field area is increased by around 240% compared to that of a traditional system. Overall, the results show that the proposed laser galvanometric scanning system achieves a small spot size, a symmetrical and round spot profile, a uniform spot energy distribution, and a large working area. As a result, it is ideally suited to rapid prototyping applications.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
