Abstract
The laminar combustion characteristics of blends of isooctane and C1–C5 primary alcohols (i.e., methanol, ethanol, n-propanol, n-butanol and n-pentanol) were investigated using the spherical expanding flame methodology in a constant volume chamber at various equivalence ratios and volume fractions of alcohol. The stretch effect was removed using the nonlinear methodology. The results indicate that the laminar flame speeds of alcohol-isooctane blends increase monotonously with the increasing volume fraction of alcohol. Among the five alcohols, the addition of methanol is identified to be the most effective in enhancing laminar flame speed. The addition of ethanol results in an approximately equivalent laminar flame speed enhancement rate as those of n-propanol, n-butanol and n-pentanol at ratios of 0.8 and 1.5, and a higher rate at 1.0 and 1.2. An empirical correlation is provided to describe the laminar flame speed variation with the volume fraction of alcohol. Meanwhile, the laminar flame speed increases with the mass content of oxygen in the fuel blends. At the equivalence ratio of 0.8 and fixed oxygen content, similar laminar flame speeds are observed with different alcohols blended into isooctane. Nevertheless, with the increase of equivalence ratio, heavier alcohol-isooctane blends tend to exhibit higher values. Markstein lengths of alcohol-isooctane blends decrease with the addition of alcohol into isooctane at 0.8, 1.0 and 1.2, however they increase at 1.5. This is consistent with the behavior deduced from the Schlieren images.
Highlights
Driven by energy shortages and environmental issues, there has been great interest in the development of alternative fuels in recent years
The difference between the alcohol flames changes with the variation of equivalence ratio
Lewis number (Le) is defined as the ratio of thermal and mass diffusivity derived by: in which λ is the thermal conductivity of the mixture,λ Cp is the specific heat of the mixture and Dm is the mass diffusivity of the deficient species
Summary
Driven by energy shortages and environmental issues, there has been great interest in the development of alternative fuels in recent years. Zhang et al [26,27] determined the laminar flame speeds and Markstein lengths of n-butanol-isooctane blends at elevated temperatures with a spherical propagating flame. They investigated the cellular instability characteristics by analyzing the critical Peclect numbers calculated from the Schlieren pictures and stability theory. Broustail et al [28,29] experimentally evaluated the laminar flame speeds and Markstein lengths of n-butanol-isooctane and ethanol-isooctane blends at different initial temperatures and pressures in a constant volume chamber. The laminar flame speeds and Markstein lengths of C1–C5 primary alcohol-isooctane blends were acquired via a spherical propagating flame in a constant volume chamber. The effect of oxygen content on the variation of laminar flame speed was illustrated
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
