Abstract

Abstract. It is well known that there is an infinite number of ways of constructing a globally defined density variable for the ocean, with each possible density variable having, a priori, its own distinct diapycnal diffusivity. Because no globally defined density variable can be exactly neutral, numerical ocean models tend to use rotated diffusion tensors mixing separately in the directions parallel and perpendicular to the local neutral vector at rates defined by the isoneutral and dianeutral mixing coefficients respectively. To constrain these mixing coefficients from observations, one widely used tool is inverse methods based on Walin-type water mass analyses. Such methods, however, can only constrain the diapycnal diffusivity of the globally defined density variable γ – such as σ2 – that underlies the inverse method. To use such a method to constrain the dianeutral mixing coefficient therefore requires understanding the relations between the different diapycnal diffusivities. However, this is complicated by the fact that the effective diapycnal diffusivity experienced by γ is necessarily partly controlled by isoneutral diffusion owing to the unavoidable misalignment between iso-γ surfaces and the neutral directions. Here, this effect is quantified by evaluating the effective diapycnal diffusion coefficient pertaining to five widely used density variables: γn of Jackett and McDougall (1997); the Lorenz reference state density ρref of Saenz et al. (2015); and three potential density variables σ0, σ2 and σ4. Computations are based on the World Ocean Circulation Experiment climatology, assuming either a uniform value for the isoneutral mixing coefficient or spatially varying values inferred from an inverse calculation. Isopycnal mixing contributions to the effective diapycnal mixing yield values consistently larger than 10−3 m2 s−1 in the deep ocean for all density variables, with γn suffering the least from the isoneutral control of effective diapycnal mixing and σ0 suffering the most. These high values are due to spatially localised large values of non-neutrality, mostly in the deep Southern Ocean. Removing only 5 % of these high values on each density surface reduces the effective diapycnal diffusivities to less than 10−4 m2 s−1. The main implication of this work is to highlight the conceptual and practical difficulties of relating the diapycnal mixing diffusivities inferred from global budgets or inverse methods relying on Walin-like water mass analyses to locally defined dianeutral diffusivities. Doing so requires the ability to separate the relative contribution of isoneutral mixing from the effective diapycnal mixing. Because it corresponds to a special case of Walin-type water mass analysis, the determination of spurious diapycnal mixing based on monitoring the evolution of the Lorenz reference state may also be affected by the above issues when using a realistic nonlinear equation of state. The present results thus suggest that part of previously published spurious diapycnal mixing estimates could be due to isoneutral mixing contamination.

Highlights

  • Tracers in the oceans are stirred and mixed preferentially along isopycnal surfaces (e.g. Iselin, 1939; Montgomery, 1940; Solomon, 1971)

  • Inverse methods based on Walin-type water mass analyses produce observationally constrained diapycnal diffusivities Kγ for the globally defined density variable γ underlying the isopycnal analysis

  • Since inverse methods give us information about Kγ, while what we need in numerical ocean models is Kd, our ability to use Walin-type inverse approaches to constrain neutral rotated diffusion tensors depends on our ability to understand how the various diffusivities Kγ and Kd are interrelated

Read more

Summary

Introduction

Tracers in the oceans are stirred and mixed preferentially along isopycnal surfaces (e.g. Iselin, 1939; Montgomery, 1940; Solomon, 1971). A. Hochet et al.: Isoneutral control of effective diapycnal mixing in ocean models tive temperature) and salinity by means of a rotated diffusion tensor aligned with the local neutral direction. The problem arises because the local concept of neutral mixing cannot be extended globally (see Appendix A) This implies that the “effective cross-isopycnal mixing” experienced by a material density variable γ (S, θ ), that is, the local diffusive flux of γ through an iso-γ surface (i.e. γ = constant) must at least be partly controlled by isoneutral mixing. Our results provide the first estimate of the uncertainties associated with diagnosing diapycnal mixing in the presence of isoneutral mixing They further suggest that their effect might, be more important than usually assumed, warranting more attention than it has received.

Effective diffusivity
Reference profile
Findings
Conclusions

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.