Abstract
Ion exchange is incorporated in flow injection analysis by using a resin column in the sample loop of an electronically operated proportional injector. Effects of sample aspiration rate, sampling time, eluting agent concentration, pumping rate of the sample carrier stream, resin column size and sample acidity, were investigated to develop a preconcentration procedure for ammonium ion determination in natural waters at the μg 1 -1 level with pulsed Nessler reagent. The possibility of sample buffering before the adsorption step was studied. The proposed method is characterized by a precision of about 2%, a sampling rate of about 40 samples per hour. and a reagent consumption of 40 μl per sample, and is almost free of interferences. Recoveries from 95 to 105% were achieved in analysing rain-water samples with ammonium contents of less than 200 μg 1 -1. Alternative flow diagrams and the injector command unit are discussed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
