Abstract
A validated ion chromatographic method was developed and applied for the determination of the maximum solubility of pyridinium ionic liquids in several aromatic solvents. Elution was performed on a Metrosep C3-150 prototype column at 40°C with acetonitrile-water at a flow rate of 1.0 mL min(-1). Mixtures of pyridinium ionic liquids and aromatic solvents were diluted with acetonitrile and acetone on a 1:1:2 weight base before the analysis. The chromatographic time only took 20 min. The standard curves for both pyridinium ionic liquids ([4-mebupy]BF4 and [3-mebupy]N(CN)2) were linear (r(2) = 0.9980-0.9998) in all aromatic solvents (toluene, benzene, ethylbenzene and o-xylene) in the concentration range of 5.37-241 mg kg(-1). The intraday relative standard deviations (n = 3) for peak areas were 0.60-2.9%. Accuracy in the measurement of samples ranged from 98.5 to 105%. The limit of detection for both pyridinium ionic liquids in all solvents varied between 0.73 and 2.6 mg kg(-1). This assay has been successfully applied in the determination of the maximum solubilities of both pyridinium ionic liquids in several aromatic solvents. This method demonstrated that with increasing aromatic character and/or temperature the solubilities of both investigated pyridinium ILs in the aromatic solvents increase. This is primary caused by the nature of the anion.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.