(Invited) Towards a Vertical and Damage Free Post-Etch InGaAs Fin Profile: Dry Etch Processing, Sidewall Damage Assessment and Mitigation Options

Abstract

Based on current projections, III-Vs are expected to replace Si as the n-channel solution in FinFETs at the 7nm technology node. The realisation of III-V FinFETs entails top-down fabrication via dry etch techniques. Vertical fins in conjunction with high quality sidewall MOS interfaces are required for high-performance logic devices. This, however, is difficult to achieve with dry etching. Highly anisotropic etching required of vertical fins is concomitant with increased damage to the sidewalls, resulting in the quality of the sidewall MOS interface being compromised. In this work, we address this challenge in two stages by first undertaking a systematic investigation of dry etch processing for fin formation, with the aim of obtaining high resolution fins with vertical sidewalls and clean etch surfaces. In the second stage, dry etch process optimisation and post-etch sidewall passivation schemes are explored to mitigate the damage arising from anisotropic etching required for the realisation of vertical fins.