Abstract

AbstractReplacement of poly-Si and SiO2with new gate electrode and high k gate oxide is an inevitable trend for next-generation CMOS integrated circuits. Therefore, work function (£Xm) of gate electrodes as well as the thermal stability and electrical behaviors of MOS capacitors should be understood. In this study, tungsten (W) is applied as the gate electrode and the gate dielectric materials are SiO2, SiON and HfO2. £Xm of W and electrical properties of the MOS structures are investigated. £Xm,measuredof W is calculated from the flat-band voltage (VFB) of MOS capacitors with dielectrics of various thicknesse. For W/SiO2/Si structure, the £Xm,measuredof W is 4.67 V; however, the £Xm,measuredof W in W/SiON/Si and W/HfO2/Si structures is 4.60 V and 4.84 V, respectively. The result means that the £Xm,measuredof W in W/HfO2/Si structures has extrinsic contributions to Fermi level pinning. The phase of as-deposited W is £]-W (or £]-W+£\-W) phase and transfers to £\-W+WO3 mix phase after annealing at 500°C in N2+H2 ambient for 30 min. The trapped charges and oxide charges of dielectric are reduced after annealing. However, the EOT of W/SiO2/Si increases significantly after annealing, indicating the thermal stability of this capacitor is poor.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.