Abstract
The self-absorption at reduced air pressure for quantitative analysis of Mn and Cu elements in steel using laser-induced breakdown spectroscopy was investigated. The calibration curves of Mn and Cu elements at the air pressures of 100, 80, 50, 20, and 1 kPa were studied. The results show that, the nonlinearity of calibration curves which caused by self-absorption effects at atmosphere could be significantly improved by reducing the air pressure to 1 kPa, and the coefficients of determination (R2) of linear calibration curves of Mn and Cu lines are all higher than 0.99. The further study explored that the reason for the improvement was that the induced plasma became low density and the self-absorption coefficient was close to 1 when the air pressure reduced to 1 kPa.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
