Abstract
This paper discusses the results of a study focused on the nature of the interaction of Me-MeN-(Me,Mo,Al)N coatings (where Me = zirconium (Zr), titanium (Ti), or chromium (Cr)) with a contact medium based on the Ni-Cr system. The studies were carried out during the turning of nickel–chromium alloy at different cutting speeds. The hardness of the coatings was found, and their nanostructure and phase composition were studied. The experiments were conducted using transmission electron microscopy (TEM), X-ray diffraction (XRD), and selected area electron diffraction (SAED). According to the studies, at elevated cutting speeds, the highest wear resistance is demonstrated by the tools with the ZrN-based coating, while at lower cutting speeds, the tools with the TiN- and CrN-based coatings had higher wear resistance. At elevated cutting speeds, the experiments detected the active formation of oxides in the ZrN-based coating and less active formation of oxides in the CrN-based coating. No formation of oxides was detected in the TiN-based coating. The patterns of cracking in the coatings were also studied.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
