Abstract
Diffusion-controlled leaching of heavy metals (Cr, Ni, Pb and Zn) from electric arc furnace dust treated with ground granulated blast furnace slag (GGBFS) and with ordinary Portland cement (OPC) was evaluated. Monolithic specimens were evaluated under dynamic leaching conditions for 84 days with periodic leachant renewal. The influence of leaching time, nature of the leachant, binder type and the water/solid ratio of the monoliths were investigated. Results obtained showed both binders can immobilize heavy metals in the monoliths under dynamic leaching conditions, with cumulative quantity of leached metal under 0.138 mg (Cr). Alkaline leachant increased metal release from specimens and reducing the water/solid ratio of the monolith allowed for a decrease in the cumulative mass of metals leached. Chemical and mineralogical characterizations indicated that the metals were evenly distributed throughout the specimens for both binders. Decalcification was observed on the OPC monolith border following leaching. This decrease in Ca corresponded to an altered zone (20 μm), identified by scanning electron microscopy. The GGBFS sample did not show an altered zone.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
