Abstract
Constructed wetlands (CWs) are used for the treatment of wastewater by natural processes. Knowledge of the flow dynamics of wastewater through the CWs is required to evaluate their performance, operation and design. The residence time distribution (RTD) approach was used to evaluate the above-mentioned parameters in a CW. The RTD of wastewater flowing through a pilot-scale CW was measured using Technetium-99 m (99mTc) as a radiotracer. The measured data were analyzed, and mean residence time and stagnant volumes were quantified under different operating conditions. A plug flow component in series along with a tank-in-series model with an exchange between the active and dead zones was used to simulate the measured RTD curves and investigate the flow dynamics of the flowing wastewater. The results of the study showed that the optimum flow rate and wastewater level in the CW was 2.3 m3/s and 0.6 m, respectively. Moreover, the results of the study will help in the operation and design of the existing wetland and design of new wetlands.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
