Investigation of Electromagnetic Wave Absorption Properties of Ni-Co and MWCNT Nanocomposites.

Abstract

In recent years, severe electromagnetic interference among electronic devices has been caused by the unprecedented growth of communication systems. Therefore, microwave absorbing materials are required to relieve these problems by absorbing the unwanted microwave. In the design of microwave absorbers, magnetic nanomaterials have to be used as fine particles dispersed in an insulating matrix. Besides the intrinsic properties of these materials, the structure and morphology are also crucial to the microwave absorption performance of the composite. In this study, Ni-Co- MWCNT composites were synthesized, and the changes in electric permittivity, magnetic permeability, and reflectance loss of the samples were evaluated at frequencies of 2 to 18 GHz. Nickel-Cobalt-Multi Wall Carbon Nanotubes (MWCNT) composites were successfully synthesized by the co-precipitation chemical method. The structural, morphological, and magnetic properties of the samples were characterized and investigated by X-ray diffractometer (XRD), Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), Vibrating Sample Magnetometer (VSM), and Vector Network Analyzer (VNA). The results revealed that the Ni-Co-MWCNT composite has the highest electromagnetic wave absorption rate with a reflectance loss of -70.22 dB at a frequency of 10.12 GHz with a thickness of 1.8 mm. The adequate absorption bandwidth (RL <-10 dB) was 6.9 GHz at the high-frequency region, exhibiting excellent microwave absorbing properties as a good microwave absorber patent. Based on this study, it can be argued that the Ni-Co-MWCNT composite can be a good candidate for making light absorbers of radar waves at frequencies 2- 18 GHz.