Abstract
This work compares the outcomes of different flow rates of hydrogen added by induction and injection methods in three different flow rates (3, 9, and 15 LPM) through the intake manifold of a constant speed CRDI diesel engine operated at 1500 rpm. The premixed air and hydrogen mixture was ignited by injecting diesel fuel at 23⁰ bTDC. Hydrogen addition reduced CO, HC, and smoke in both the techniques, but efficiency was decreased at a higher percentage of hydrogen induction, whereas it increased with the injection technique. The higher calorific value and flame velocity helped proper combustion and improved brake thermal efficiency by 7%, and the brake-specific energy consumption was reduced by 10.7%. In addition, CO, UHC, and Smoke were decreased by 15.8, 29.7, and 15% compared with neat diesel at full BMEP. Nitrogen oxides decreased by 5.6% for 15 LPM of hydrogen injection compared to the induction method with the same flow rate but higher than diesel fuel by 35.9%. Three different EGR percentages (5, 7.5, and 10%) were used to reduce the higher NOx emission. Though the injection process was complex compared to the induction method, the injection process can provide promising results even at higher hydrogen flow rates.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
